Dynamometers, Dynamometer

Dynamometers: Dynamometers with Removable Displays

RON 2150-Shackle Type (shackles not included)

RON 2150 Dynamometer is a unique combination of the smallest and lightest load cell with a very large display.

The small and light load cell ensures portability and low headroom loss for any application. The large display ensures readability from a considerable distance.

RON 2150 also offers two systems in one: the removable display enables the user either to hold the large indicator in his hand or snap it very easily onto the load cell. By this means, the user's personal safety is ensured as under no circumstances will he have to approach the load in order to read the result: he will either hold the remote indicator in his hand or read the large display from a safe distance.

The separation of load cell and display also increases the system's durability.

The load cell's unique perpendicular hole structure neutralizes external moments and thus improves safety and accuracy.

RON Crane Scale and cable Dynamometer series are used for weighing during lifting, overload prevention, force, load and tension measurement and cable and wire tension monitoring and control.

Cable Dynamometers are often used by electricity and communication companies for cable and wire tension monitoring and control. RON systems’ low weight ensures their portability and makes them especially suitable for these applications.

A marine version of the RON 2150 Shackle Type is also available for offshore applications.

All Crane Scales and Cable Dynamometers are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.

Specifications

Safety Factor: Designed to 5:1.

Proof Load: Up to 200t: Each system proof-loaded to 200% of capacity (certified)
Above 200t: Each system proof-loaded to 150% of capacity (certified).

Accuracy: 0.1% of full range + 1 resolution step.

Durability: Robust extruded aluminum indicator housing, iridized and polyurethane coated.

Display: 5 digits, 2" (50mm) liquid crystal display and annunciator; two-level overload state, max. value (peak hold), low battery, tare state (gross or net), measuring units, sleep state, charge, and programming instructions. Number of measurements per second:1.

Functions: Zero Tare Low battery warning Max. (peak hold) Two-level overload detection User calibration Sleep mode after 60 sec. in zero value, awakes automatically when loaded.

Units: Available in the following measurement readings: metric tons, short tons (2000 lbs), kgs, lbs (lbsx10 or lbsx100 for capacities of 50t and above), newtons, deca Newtons, k. newtons.

Load Cell Material: Made of high-strength, aerospace quality, alloy steel, Polyurethane coated.

Power: 3 x AA (“finger”) 1.5 Volt Alkaline disposable batteries. Batteries rated 3AH will function for at least, 2000 hours (more than two months) of continuous work. Occasional use will extend the life of the batteries, up to several years. Adding certain options will shorten the life of the batteries. All settings retained at power off.

Calibration: User calibration. Initial factory calibration, fully traceable (certified).

Temperature Range: -15°F to +175°F (-25°C to +80°C).

Environmental: Weather proof, NEMA 4, IP65.

Options:

	Analog output: 0-1V
	Analog output: 4 to 20 mA
	Average display for unstable load.
	Batteries: Rechargeable batteries, with an external charger for charging the batteries inside the system.
	Baud rate: User-selectable baud rate
	Carrying case
	Clock: Real time clock
	Data loggera-aup to 600 measurements
	Data loggerb-bup to 3000 measurements
	Data loggerc-cup to 6000 measurements
	Display: Additional 2" /50mm LCD wireless (R.F.) display
	Display: Additional 2" /50mm LCD display with cable connection to indicator
	Display: Additional indoor 4" /100mm L.E.D. display with cable connection to indicator.
	Display: Additional outdoor 4" /100mm L.E.D. display with cable connection to indicator.
	Longer extension cable. In 15ft/5m increments
	Number of measurements per second: 2/3/4/5/6/7/8/20/30, factory set
	Offshore sealing level: IP 67 load cell with special off-shore connectors
	Printer
	RS-232 - Continuous data output or on demand, user-selectable,for cable connection
	RS-232 - Wireless output
	Set points (1 or 2)
	Spare cable In 15ft/5m increments
	Totalizer
	Underwater sealing level: IP 68 Load cell with underwater capability
	Units: User-selectable units
	Wireless (R.F.) data transmission.