 |
 Print version |
 |
 |
Crane Scales: Crane Scales with Removable Display |
|
|
|
 |
RON 2150-Hook Type
Technical specifications, drawing and dimensions table (scroll further down) |
|
|
|
RON 2150 Hook Type is a unique electronic Crane Scale with large 2” / 50mm removable display.
The removable display enables the user either to hold the large indicator in his hand or snap it very easily onto the load cell.
By this means, the user's personal safety is ensured, as under no circumstances will he have to approach the load in order to read the result: he will either hold the remote load indicator in his hand or read the large display from a safe distance.
The separation of hanging Load Cells and displays also increases the systems’ durability.
The small Crane Scales’ hanging Load Cells ensure low headroom loss for any below hook weighing or load measurement application.
RON electronic Crane Scale, Dynamometer and Load Cell series are used for force measurement, below hook weighing during lifting, overload prevention and load measurement.
2000 hour battery life - applicable to all RON crane scale, dynamometer and
load cell series and load cells with built-in amplifier:
RON Crane Scales excel in high quality, are based on the latest technologies
and comply with the strictest safety standards.
All RON Crane Scales are made of the highest quality, aerospace steel.
All RON Crane Scales hanging Load Cells and Dynamometers are factory-tested
and supplied with a test certificate, including a fully traceable
calibration chart.
|
|
If you wish to download product brochures and technical specifications to your computer, click here to download ZIP
|
|
Specifications
|
Options
|
Safety Factor: Designed to 5:1 for the load cell and the lifting eye. Average straightening load of the hook is at least 4 times the capacity.
Proof Load: Each system proof-loaded to 200% of capacity (certified) up to a test force of 400t.
Accuracy: ± 0.1% of full range.
Durability: Robust extruded aluminum indicator housing, iridized and polyurethane coated.
Display: 5 digit, 2" (50mm) liquid crystal display and annunciator; two-level overload state, max. value (peak hold), low battery, tare state (gross or net), measuring units, sleep state, charge, and programming instructions. Standard number of measurements per second: 1.
Functions: Zero. Tare. Low battery warning. Max. (peak hold). Two-level overload visual alarms. User calibration. Sleep mode after 60 sec. in zero value, awakes automatically when loaded.
|
|
Units: available in the following measurement readings: metric tons, short tons (2000 lbs), kgs, lbs, newtons, deca newtons, k. newtons.
Load Cell Material: Made of high-strength, aerospace quality, alloy steel, polyurethane coated.
Indicator Material: Extruded aluminum.
Power: 3 x AA (“finger”) 1.5 Volt Alkaline disposable batteries. Batteries rated 3AH will function for at least 2000 hours (at least three months of continuous working). Occasional use will extend the life of the batteries, up to several years. Adding certain options will shorten the life of the batteries. All settings retained at power off.
Cable: Supplied with 16' / 5m cable.
Calibration: User calibration. Initial factory calibration, fully traceable (certified).
Temperature Range: -15°F to +175°F
(-25°C to +80°C).
Environmental: Weatherproof, NEMA 4, IP65.
|
|
 1 or 2 user-adjustable set points
Additional 2"/50mm LCD display with cable connection to indicator
Additional 4"/100mm LED display with cable connection to indicator
Additional spare cable in 15ft/5m increments
Analog output: 0 to 1V/0 to 2V/0 to 3V
Analog output: 4 to 20 mA
Baud rate, user-selectable
Dampened (average) display for
unstable load
Data logger – up to 600
measurements
Data logger – up to 3000
measurements
Data logger – up to 6000
measurements
Fatigue rated load cell
IP 67 load cell with special
off-shore connectors
Longer extension cable in 15ft/5m
increments
Number of measurements per
second: 2/3/4/5/6/7/8/20/30, factory set
Real-time clock
Rechargeable batteries with an
external charger for charging
the batteries inside the system
RS-232 - continuous or on demand
data output, user-selectable
RS-485 - continuous or on demand
data output, user-selectable
Totalizer
Units, user-selectable
Wireless (R.F.) data transmission
|
RON 2150 - H
 |
| 15.08.07 |
| Cat no. | Cap. | Resolution | A | B | C | Ø D | E | H | | tons | kgs | lbs | mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | | H-005# | 0.5 | 0.2 | 0.5 | 51 | 2 | 38 | 1.5 | 31 | 1.25 | 13 | 0.5 | 25 | 1 | 300 | 11.88 | | H-01# | 1 | 0.5 | 1 | 38 | 1.5 | 31 | 1.25 | 31 | 1.25 | 10 | 0.38 | 22 | 0.88 | 300 | 11.88 | | H-0125# | 1.25 | 0.5 | 1 | 51 | 2 | 38 | 1.5 | 31 | 1.25 | 13 | 0.5 | 25 | 1 | 300 | 11.88 |
| H-016# | 1.6 | 1 | 2 | 51 | 2 | 38 | 1.5 | 31 | 1.25 | 13 | 0.5 | 25 | 1 | 300 | 11.88 | | H-025 | 2.5 | 1 | 2 | 67 | 2.63 | 51 | 2 | 29 | 1.13 | 19 | 0.75 | 29 | 1.13 | 290 | 11.5 | | H-03 | 3 | 1 | 2 | 67 | 2.63 | 51 | 2 | 29 | 1.13 | 19 | 0.75 | 29 | 1.13 | 290 | 11.5 | | H-032 | 3.2 | 2 | 5 | 67 | 2.63 | 51 | 2 | 29 | 1.13 | 19 | 0.75 | 29 | 1.13 | 290 | 11.5 | | H-05 | 5 | 2 | 5 | 89 | 3.5 | 63 | 2.5 | 37 | 1.5 | 25 | 1 | 37 | 1.44 | 330 | 13 | | H-10 | 10 | 5 | 10 | 102 | 4 | 78 | 3.13 | 57 | 2.25 | 32 | 1.25 | 57 | 2.25 | 480 | 19 | | H-12* | 12 | 5 | 10 | 98 | 3.8 | 82 | 3.2 | 64 | 2.5 | 32 | 1.2 | 56 | 2.2 | 528 | 20.8 | | H-15* | 15 | 5 | 10 | 112 | 4.4 | 88 | 3.5 | 72 | 2.8 | 35 | 1.4 | 60 | 2.4 | 566 | 22.3 | | H-20* | 20 | 10 | 20 | 137 | 5.3 | 111 | 4.3 | 79 | 3.1 | 41 | 1.6 | 71 | 2.8 | 621 | 24.5 | | H-25* | 25 | 10 | 20 | 169 | 6.6 | 146 | 5.7 | 99 | 3.9 | 51 | 2 | 86 | 3.4 | 744 | 29.3 | | H-30* | 30 | 10 | 20 | 169 | 6.6 | 146 | 5.7 | 99 | 3.9 | 51 | 2 | 86 | 3.4 | 744 | 29.3 | | H-32* | 32 | 20 | 50 | 169 | 6.6 | 146 | 5.7 | 99 | 3.9 | 51 | 2 | 86 | 3.4 | 744 | 29.3 |
# This capacity is equipped with two-link chain between load cell and chain hook. 
* This capacity is equipped with:
1) Shackle instead of lifting eye.
2) Eye hook instead of shank hook.
The company reserves the right to make changes without notice.
|
|
|
|
|
|
|
RON Crane Scales range of products includes crane scales, dynamometers, hanging scales, load cells and overload detectors.
|
|
|
RON Crane Scales offer a wide variety of models, features and advanced options, some of which are unique to RON Crane Scales. For example: The internal thermometer for the wireless hanging scales and dynamometers which is very important when using hanging scales and dynamometers in hot environments such as foundries. Thanks to the internal thermometer the user will know exactly when to take the hanging scales or dynamometers away from the hot area and allow it to cool down.
|
|
|
RON Crane Scales models which include hanging scales, crane scales, dynamometers, load cells and overload detectors offer compact dimensions for both portability and minimum headroom loss, while maintaining a high safety factor.
|
|
|
RON Crane Scales products have been designed to ensure the user's safety by having a standard remote display for all crane scales and hanging scales, or removable displays or large integral displays that can be seen from almost any direction. These features enable the hanging scales, dynamometers and crane scales users to read the measurements from a safe distance.
|
|
RON Stage Master