3050 for print

Crane Scales: Crane Scales

RON 3050

RON 3050 Crane Scale (crane weigher) is an industrial hanging scale, available with either a single or double back-to-back displays.

The Large-scale LCD display can be read at a considerable distance, even in sunlight thus ensuring the users safety and comfort.

The robust enclosure of the digital load cell is made of extruded aluminum. Absolutely no castings in the unit.

The dimensions of this hanging scale ensure minimum loss of headroom.

All crane weighers are factory-tested and supplied with a test certificate, including a fully traceable calibration chart.

Specifications

Safety Factor: Designed to 5:1, for the load cell and the lifting eye. Average straightening load of the hook is at least 4 times.

Proof Load: Each system proof-loaded to 200% of capacity (certified).

Accuracy: 0.1% of full range + 1 resolution step.

Durability: Robust extruded aluminum housing, iridized and polyurethane coated.

Display: 5 digits, 2" (50mm) liquid crystal display and annunciator; two-level overload state, max. value (peak hold), low battery, tare state (gross or net), measuring units, sleep state, charge, and programming instructions. Number of measurements per second:1.

Functions: Zero. Tare. Low battery warning. Max. (peak hold). Two-level overload detection. User calibration. Sleep mode after 60 sec. in zero value, awakes automatically when loaded.

Units: Available in the following measurement readings: metric tons, short tons (2000 lbs), kgs, lbs, newtons, deca newtons, k. newtons.

Load Cell Material: Made of high-strength, aerospace quality, alloy steel, Polyurethane coated.

Power: 3 x AA (“finger”) 1.5 Volt Alkaline disposable batteries. Batteries rated 3AH will function for at least, 2000 hours (more than two months) of continuous work. Occasional use will extend the life of the batteries, up to several years. Adding certain options will shorten the life of the batteries. All settings retained at power off.

Calibration: User calibration. Initial factory calibration, fully traceable (certified).

Temperature Range: +5°F to +175°F (-15°C to +80°C).

Environmental: Weather proof, NEMA 4, IP65.

Options:

	Wireless (R.F.) data transmission.
	Analog output: 0-1V
	Analog output: 4 to 20 mA
	Average display for unstable load.
	Batteries: Rechargeable batteries, with an external charger for charging the batteries inside the system.
	Baud rate: User-selectable baud rate
	Clock: Real time clock
	Data loggera-aup to 600 measurements
	Data loggerb-bup to 3000 measurements
	Data loggerc-cup to 6000 measurements
	Display: Additional 2" /50mm LCD wireless (R.F.) display
	Display: Additional 2" /50mm LCD display with cable connection to indicator
	Display: Additional indoor 4" /100mm L.E.D. display with cable connection to indicator.
	Display: Additional outdoor 4" /100mm L.E.D. display with cable connection to indicator.
	Displays: Double, back-to-back displays
	Fatigue rated load cell.
	Number of measurements per second: 2/3/4/5/6/7/8/20/30, factory set
	Printer
	RS-232 - Continuous data output or on demand, user-selectable,for cable connection
	RS-232 - Wireless output
	RS-485 - continuous or on demand data output, user-selectable.
	Set points (1 or 2)
	Swivel hook
	Totalizer
	Units: User-selectable units